Undertake the planning, design, specification and integration of industrial utility systems, including:
Steam generation, distribution, pressure reduction and condensate recovery
Hot-water and cold-water generation and distribution
Chilled-water and cooling-water systems
Compressed-air systems, including high- and low-pressure applications
Process manufacturing gas utilities such as nitrogen (normal and high purity), and helium
Industrial refrigeration systems, including natural refrigerants such as ammonia, CO2, propane, etc. and synthetic refrigerants
Cascade and multi-stage refrigeration systems
CO₂ refrigeration, recovery, liquefaction and storage systems
Process heating and cooling systems
Industrial and specialist ventilation systems
Specialist piping and fluid-flow systems
Utility metering, monitoring and energy-recovery systems
Specify appropriate thermal insulated walls, floors and doors for people and material movement
Design refrigeration and temperature-controlled facilities, including
Cold rooms and freezer rooms
Blast freezers and blast chillers
Banana, tropical and other controlled-atmosphere ripening rooms
Bulk defrosting rooms
Specialist relative-humidity and temperature-controlled rooms
Food-processing and value-add production facilities
Refrigerated warehousing and distribution facilities
Post-harvest cooling facilities
Prepare engineering calculations, equipment selections, datasheets, technical specifications, schedules, tender documentation and Bills of Quantities.
Be proficient in preparing, reviewing and developing
Process Flow Diagrams (PFDs)
Piping and Instrumentation Diagrams (P&IDs)
Utility flow diagrams and system schematics
Equipment and line lists
Valve schedules and utility schedules
Control philosophies, operating narratives and process descriptions
Plantroom and equipment layouts
Piping layouts, routing and support requirements
Interface schedules and tie-in schedules
Contractor commissioning documentation
Perform engineering calculations relating to
Heat and mass balances
Refrigeration loads
Thermodynamic cycles
Pipe sizing and pressure-drop analysis
Pump, fan and compressor selection
Steam and condensate system sizing
Hydraulic and fluid-flow network analysis
Equipment capacity and redundancy requirements
Thermal insulation requirements
Energy use, heat recovery and system efficiency, system energy modelling
Specify and evaluate specialist equipment such as boilers, chillers, cooling towers, refrigeration compressors, condensers, evaporators, pumps, pressure vessels, heat exchangers, air compressors, dryers, receivers and water-treatment equipment.
Develop refrigeration plant process descriptions and control requirements for translation into control and automation programmes.
Coordinate mechanical utility systems with process, electrical, controls and instrumentation, structural, civil, architectural and fire-engineering disciplines.
Understanding of pressure systems, pressure vessels and associated safety requirements
Familiarity with hazardous-area requirements, where applicable
Knowledge of refrigerant safety, ammonia safety and refrigerant environmental requirements
Experience with utility consumption analysis and energy optimisation
Ability to carry out technical bid evaluations and vendor-document reviews
Understanding of control valves, instrumentation, isolation philosophy and plant control interfaces
Knowledge of equipment duty/standby philosophy, resilience and redundancy
Familiarity with commissioning plans, test procedures and performance verification
Knowledge of pipe materials, piping classes, valves, fittings, insulation and corrosion protection
Ability to conduct or contribute to plant surveys, utility audits and capacity assessments
Apply relevant South African and international standards, statutory requirements and recognised industry codes to industrial utility and refrigeration designs.
Participate in HAZOP, design-risk, constructability and operability reviews where applicable.
Undertake site inspections, condition assessments, commissioning, performance testing, troubleshooting and optimisation of industrial utility and refrigeration systems.
Review contractor drawings, technical submissions, method statements, commissioning procedures & results, and operation and maintenance documentation.
Ensure that designs consider maintainability, operability, reliability, energy efficiency, lifecycle cost and safe access.
Digital Capability
Skilled in engineering calculation and modelling tools applicable to industrial utilities, refrigeration, thermodynamics, fluid flow and heat transfer.
Proficient in the preparation and coordination of PFDs, P&IDs, plant layouts, piping layouts and mechanical services models.
Competent in AutoCAD and familiar with Revit, Navisworks, Autodesk Construction Cloud and other approved digital-delivery platforms.
Experience with pipe-network, hydraulic, thermal or process-simulation software will be advantageous.
Experience with refrigeration-selection software and manufacturer equipment-selection tools will be advantageous.
Experience with HVAC load-calculation software, ventilation design, psychrometric analysis and HVAC modelling tools will be advantageous.
Proficiency in Microsoft Excel for engineering calculations, equipment schedules, utility balances and technical evaluations.
Demonstrates digital literacy and effectively applies technology, data and digital-engineering tools relevant to industrial utility and refrigeration design.
Applies BIM principles and supports multidisciplinary model coordination, clash detection and digital information management.
Uses digital tools and data to improve project delivery, collaboration, quality, efficiency and client outcomes.
Maintains high standards of digital information management and data quality in accordance with company digital-governance requirements.
Continuously develops digital capability and contributes to a culture of innovation, automation and improvement
Client Care & Marketing
Build and maintain strong client relationships, earning respect and trust.
Understand clients’ needs and deliver tailored solutions.
An established client base is advantageous.
Time & Team Management
Demonstrate strong leadership in communication, resource management, and teamwork.
Ability to work unsupervised, managing time, quality, and effort to deliver high-quality results within time and cost constraints.
Project & Financial Management
Handle project scoping, scope monitoring, and cost control related to mechanical systems.
Proficient in preparing tender documentation and managing the tender process.
Competent in the formulation of Bills of Quantities (BOQs).
Oversee contractor and contract management within the mechanical discipline.
Critical Thinking & Problem Solving
Apply logic and reasoning to identify strengths and weaknesses of alternative solutions.
Make sound judgments and decisions using both deductive and inductive reasoning.
Use scientific principles to solve complex engineering problems.
Able to research new technologies and apply sound engineering judgement to implement.
Communication Skills
Effectively convey information, both written and oral.
Possess excellent communication and technical report-writing skills.
Quality Assurance & Site Supervision
Ensure quality control (QA/QC) throughout project stages.
Provide site supervision and monitor construction processes.
Troubleshoot issues on existing installations.
HEALTH AND SAFETY
Role model standards for SHEQ performance and behaviour consistent with the company’s health, safety, environmental and quality vision and policies by influencing those around you
Contributing to the identification of SHEQ risks and driving processes to achieve Zero Harm
Embracing, displaying and promoting the company values and ensuring a safe working environment is maintained at all times, whether in the office environment, on construction sites or in the general environment.
QUALIFICATIONS AND EXPERIENCE REQUIRED
Must have a B.Eng., B.Sc. Eng. or B.Tech. Eng. degree in Mechanical or Mechatronic Engineering.
Must have a minimum of three years’ post-graduate experience in consulting engineering, industrial projects, process facilities or a related engineering environment.
Must have relevant design and construction-monitoring experience in industrial utility and/or refrigeration systems.
Experience should include three or more of the following
Industrial refrigeration systems
Ammonia refrigeration
Commercial refrigeration
Cold-storage and refrigerated distribution facilities
Steam and condensate systems
Compressed-air systems
Chilled-water and cooling-water systems
Process heating and cooling
Specialist piping and fluid-flow systems
Industrial ventilation
Must be able to develop and interpret PFDs and P&IDs.
Must have experience in engineering calculations, equipment selection, technical specifications, tender documentation and construction monitoring.
Must have an understanding of mechanical control philosophies and controls and instrumentation interfaces.
Experience in two or more of the following sectors will be advantageous:
Food and beverage
Cold-chain and refrigerated distribution
Advanced manufacturing
Clean rooms and controlled environments
Data centres
Warehousing and logistics
Breweries and wineries
Process and industrial facilities
Must have a basic understanding and working knowledge of Revit.
Must have a good understanding of document-management and common-data-environment platforms such as Autodesk Construction Cloud.
Experience in HVAC, medical gases, wet services/public health, fire engineering services, fuel systems and vertical transportation will be advantageous.
Previous experience within a consulting engineering organisation will be preferred.
Professional registration as a Pr Eng or Pr Tech Eng, or eligibility for professional registration, will be advantageous.
KEY COMPETENCIES AND GENERIC SKILLS
Code B drivers licence (preferably own car)
Computer literacy (programming skills will be advantageous)
Experience in various Autodesk products (AutoCAD, Revit, Navisworks, Autodesk Forma suite)
Must be self-motivated
Team player
Excellent communicator and good discussion and problem resolution skills
A self-starter who can run with and manage his own projects with the guidance of a senior engineer
Skilled in thermodynamic and pipe network design principles
Must be responsible and have a high level of self-sufficiency and be able to apply common sense
Must have a questioning and inquisitive mind
Willing and able to travel