Harness Design Engineers are engaged throughout the full Product Lifecycle Management process. They advise on interface strategy during early design phases, support BOM development for interconnect components, enable integration during system build, and provide sustainment support for depot-level maintenance and upgrades.
At V2X Indianapolis, Harness Design Engineers support platforms ranging from ground systems to FAA and DoD aircraft, preferring experience in Aerospace, Electrical, RF, Mechanical Packaging, and Systems Integration. Their work ensures that every signal and power path is engineered for reliability, maintainability, and compliance—ready for deployment in the most demanding operational environments.
Travel: Limited, in support of program objectives.
Responsibilities
Execute cable and wire harness design tasks with guidance and supervision for aviation-focused military applications.
Apply AS50881 and IPC/WHMA-A-620 workmanship and routing standards to cable/harness designs.
Interpret and translate Interface Control Documents (ICDs) and system requirements into interconnect architecture, pin mapping, and routing strategies.
Incorporate electrical design considerations into wiring systems, including voltage drop, AWG selection, breaker sizing, RF line loss, relay usage, and grounding/shielding practices.
Support creation and maintenance of Technical Data Packages (TDPs), ensuring configuration control and revision traceability.
Use PTC CREO Schematics and PTC CREO Parametric to generate
Wiring diagrams and interconnect schematics
Harness drawings and wire tables
Detail and assembly models
Installation drawings and related documentation
Develop interconnect documentation sets formatted to ASME Y14.100, Y14.24, and Y14.5 standards, consistent with MIL-STD-31000.
Use PTC Windchill for document release, BOM integration, and change management.
Participate in technical project execution activities, trade studies, and engineering analyses related to interconnect design.
Coordinate with systems, electrical, mechanical, manufacturing, and program teams to ensure interconnect solutions meet fit, function, and performance requirements.
Support fit checks, routing validation, and integration activities during system build and test as needed
Contribute to preparation for internal and external technical meetings; provide clear, technical communication of design status, risks, and issues.
Manage multiple design tasks concurrently in an organized manner, maintaining attention to detail and thoroughness.
Qualifications
Minimum Qualifications
Education
Bachelor of Science degree in a STEM field, or 4+ years of equivalent experience in wiring/harness design.
US Citizenship required do to clearance requirement.
Must be able to obtain and maintain a DoD Secret clearance.
Experience
2+ years of professional engineering experience with a strong technical background, preferably in wiring/harness design.
Skills and Technology Used
Working knowledge of Microsoft Office tools (Word, Excel, Visio, Outlook, PowerPoint).
CAD tool knowledge with moderate proficiency in 3D.
Basic to moderate ability to read and develop schematics, mechanical drawings, and harness documentation.
Ability to work in a process-oriented organization and follow configuration management procedures.
Effective oral and written communication skills.
Organized, self-starting, capable of multi-tasking, and able to work both independently and in a team environment.
Ability to interface with personnel of multiple disciplines and job functions (systems, software, electrical, mechanical, manufacturing, program management, vendors).
Desired Qualifications
Experience using
Creo Schematics with WNCBridge
Creo Parametric with Cabling
PTC Windchill for PDM and configuration control
Technical knowledge and use of documentation specifications such as
MIL-STD-31000
ASME Y14.5M (dimensioning and tolerancing)
ASME Y14.24 (types of drawings)
ASME Y14.100 (drawing practices)
Cable/harness design experience with a focus on AS50881 compliant wiring products.
Familiarity with IPC/WHMA-A-620 manufacturing methods and processes for cable and wire harness assemblies.
What We Bring
At V2X we strive to be market competitive in our total reward offerings.
Employee benefits include the following
Healthcare coverage
Life insurance, AD&D, and disability benefits
Retirement plan
Wellness programs
Paid time off, including holidays and leave of absences
Eligible Tuition Reimbursement
Learning and Development resources
Employee assistance resources
Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.
At V2X we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.
#LI-VH1
Execute cable and wire harness design tasks with guidance and supervision for aviation-focused military applications.
Apply AS50881 and IPC/WHMA-A-620 workmanship and routing standards to cable/harness designs.
Interpret and translate Interface Control Documents (ICDs) and system requirements into interconnect architecture, pin mapping, and routing strategies.
Incorporate electrical design considerations into wiring systems, including voltage drop, AWG selection, breaker sizing, RF line loss, relay usage, and grounding/shielding practices.
Support creation and maintenance of Technical Data Packages (TDPs), ensuring configuration control and revision traceability.
Use PTC CREO Schematics and PTC CREO Parametric to generate
Wiring diagrams and interconnect schematics
Harness drawings and wire tables
Detail and assembly models
Installation drawings and related documentation
Develop interconnect documentation sets formatted to ASME Y14.100, Y14.24, and Y14.5 standards, consistent with MIL-STD-31000.
Use PTC Windchill for document release, BOM integration, and change management.
Participate in technical project execution activities, trade studies, and engineering analyses related to interconnect design.
Coordinate with systems, electrical, mechanical, manufacturing, and program teams to ensure interconnect solutions meet fit, function, and performance requirements.
Support fit checks, routing validation, and integration activities during system build and test as needed
Contribute to preparation for internal and external technical meetings; provide clear, technical communication of design status, risks, and issues.
Manage multiple design tasks concurrently in an organized manner, maintaining attention to detail and thoroughness.
Minimum Qualifications
Education
Bachelor of Science degree in a STEM field, or 4+ years of equivalent experience in wiring/harness design.
US Citizenship required do to clearance requirement.
Must be able to obtain and maintain a DoD Secret clearance.
Experience
2+ years of professional engineering experience with a strong technical background, preferably in wiring/harness design.
Skills and Technology Used
Working knowledge of Microsoft Office tools (Word, Excel, Visio, Outlook, PowerPoint).
CAD tool knowledge with moderate proficiency in 3D.
Basic to moderate ability to read and develop schematics, mechanical drawings, and harness documentation.
Ability to work in a process-oriented organization and follow configuration management procedures.
Effective oral and written communication skills.
Organized, self-starting, capable of multi-tasking, and able to work both independently and in a team environment.
Ability to interface with personnel of multiple disciplines and job functions (systems, software, electrical, mechanical, manufacturing, program management, vendors).
Desired Qualifications
Experience using
Creo Schematics with WNCBridge
Creo Parametric with Cabling
PTC Windchill for PDM and configuration control
Technical knowledge and use of documentation specifications such as
MIL-STD-31000
ASME Y14.5M (dimensioning and tolerancing)
ASME Y14.24 (types of drawings)
ASME Y14.100 (drawing practices)
Cable/harness design experience with a focus on AS50881 compliant wiring products.
Familiarity with IPC/WHMA-A-620 manufacturing methods and processes for cable and wire harness assemblies.
What We Bring
At V2X we strive to be market competitive in our total reward offerings.
Employee benefits include the following
Healthcare coverage
Life insurance, AD&D, and disability benefits
Retirement plan
Wellness programs
Paid time off, including holidays and leave of absences
Eligible Tuition Reimbursement
Learning and Development resources
Employee assistance resources
Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.
At V2X we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.
#LI-VH1