Supports three primary missions
Steady-state Training Support: During steady state training, support Soldiers in planning the training exercise in the TMT software, coordinating and aligning training equipment and RVCT modules to prepare for the exercise. Initializing and troubleshooting the local RVCT training network with the RVCT modules to ensure connectivity. In Execution, provide Over the Shoulder training directly to Soldiers as needed and any exercise control functions such as roleplay or intelligence reports to support training.
Point of Need training: provide the following services for the RVCT modules and associated equipment: Oversee prep for shipment, transportation, oversee set up of equipment, initializing, and troubleshooting at the Point of Need location, and over the shoulder execution support. Upon termination of the exercise, oversee prep for shipment, transportation, set up of equipment, initializing, and troubleshooting at the original location.
Surge Support: Shift personnel from other locations to support training that outweighs the current sites’ personnel requirement. Exercise could be up to 28 modules of RVCT or two companies. This will be for a limited time to support training at that site.
Travel: Will be required up to 30% of the time to include OCONUS.
Responsibilities
Responsibilities
Leads electronic maintenance activities including resourcing and training other electronic technicians.
Performs scheduled, preventive, and corrective maintenance on TADSS (e.g. RVCT, STE, and GFP), following technical manuals, preventive maintenance checklists, or industry best practices when no checklist is available.
Records all maintenance activities in real-time in MAXIMO and adheres to warranty terms for maintained items, tracking them by part number, serial number by location.
Sets up and tests TADSS and STE Devices to confirm equipment works as expected, including interoperability and operation verification
Monitors hardware baselines and provides recommendations if updates fail.
Analyzes maintenance trends, tracks component consumption, manages obsolescence, implements risk management strategies, and conducts failure analysis to minimize risks and improve system reliability.
Responsible for configuration management of all maintenance on TADSS, STE Devices, and GFP devices.
May serve as a preventive rover for unstaffed sites.
May be responsible for installing and maintaining software and hardware installs for installed applications and operating systems.
Material and Equipment Directly Used
Government Furnished Equipment (GFP), Components-Off-The-Shelf (COTS), Hand tools, soldering station, and specialized test equipment to include Digital Multimeter.
Working Environment
90% of the regular work environment is inside simulation facilities either onsite or a Point of Need (PoN) location wherever training is being conducted.
10% of the regular work is within an office environment.
Physical Activities
Physical activities include stooping, bending, lifting and/or carrying up to 35 lbs.
Short periods of walking and standing for extended periods are likely.
Qualifications
Education / Certifications
Two-year Associate's degree in an Electronics-related field, OR
Electronic Technicians Association (ETA) Basic Electronics Certification IAW ISO 17024 standards, OR
Possess a Military Occupational Specialty (MOS) in a related discipline.
Experience
Master's degree plus five (5) years of related professional experience, OR
Bachelor's degree plus eight (8) years of related professional experience, OR
Associate's degree plus ten (10) years of related professional experience, OR
No Degree / High School Diploma plus fourteen (14) years of related professional experience.
STE Device knowledge preferred.
Skills & Technology Used
Experience using Oscilloscopes, Digital Multimeter, Function Generator, Power supply, and multiple hand tools.
Experience with Microsoft office suite.
Supervisory / Budgetary Responsibilities
Leads electronic maintenance activities including resourcing and training of Electronic Technician II as assigned.
Clearance Requirement
Must be able to obtain and maintain a Public Trust / NACI clearance.
At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.
Responsibilities
Leads electronic maintenance activities including resourcing and training other electronic technicians.
Performs scheduled, preventive, and corrective maintenance on TADSS (e.g. RVCT, STE, and GFP), following technical manuals, preventive maintenance checklists, or industry best practices when no checklist is available.
Records all maintenance activities in real-time in MAXIMO and adheres to warranty terms for maintained items, tracking them by part number, serial number by location.
Sets up and tests TADSS and STE Devices to confirm equipment works as expected, including interoperability and operation verification
Monitors hardware baselines and provides recommendations if updates fail.
Analyzes maintenance trends, tracks component consumption, manages obsolescence, implements risk management strategies, and conducts failure analysis to minimize risks and improve system reliability.
Responsible for configuration management of all maintenance on TADSS, STE Devices, and GFP devices.
May serve as a preventive rover for unstaffed sites.
May be responsible for installing and maintaining software and hardware installs for installed applications and operating systems.
Material and Equipment Directly Used
Government Furnished Equipment (GFP), Components-Off-The-Shelf (COTS), Hand tools, soldering station, and specialized test equipment to include Digital Multimeter.
Working Environment
90% of the regular work environment is inside simulation facilities either onsite or a Point of Need (PoN) location wherever training is being conducted.
10% of the regular work is within an office environment.
Physical Activities
Physical activities include stooping, bending, lifting and/or carrying up to 35 lbs.
Short periods of walking and standing for extended periods are likely.
Education / Certifications
Two-year Associate's degree in an Electronics-related field, OR
Electronic Technicians Association (ETA) Basic Electronics Certification IAW ISO 17024 standards, OR
Possess a Military Occupational Specialty (MOS) in a related discipline.
Experience
Master's degree plus five (5) years of related professional experience, OR
Bachelor's degree plus eight (8) years of related professional experience, OR
Associate's degree plus ten (10) years of related professional experience, OR
No Degree / High School Diploma plus fourteen (14) years of related professional experience.
STE Device knowledge preferred.
Skills & Technology Used
Experience using Oscilloscopes, Digital Multimeter, Function Generator, Power supply, and multiple hand tools.
Experience with Microsoft office suite.
Supervisory / Budgetary Responsibilities
Leads electronic maintenance activities including resourcing and training of Electronic Technician II as assigned.
Clearance Requirement
Must be able to obtain and maintain a Public Trust / NACI clearance.
At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.