Maintain a courteous manner (language) in person and on the radio
Maintain a positive working relationship with other operators and other groups
Provide constructive input with regard to safety and operational issues
Apply Hazard Recognition training to daily workplace activities
Full knowledge of all that employee has completed a competency including but not limited to Reagent, Water Treatment Plants, Dewatering, Ball Charger and either Grinding or Flotation basics, as well as all by-pass circuits associated to the above areas
Train department personnel in operational areas in the mill including but limited to OIT duties, Reagents, Water Treatment Operations, Dewatering, Ball Charging and or either Flotation and Grinding modules
Demonstrate group leadership/mentoring
Plant functions include but are not limited to assist/aid operators and other departments in work areas, demonstrate startup/shutdown procedures, react to tonnage and grade changes in a timely manner, responds to non-compliant/irregular operating parameters, runs equipment in auto to maximize recovery and minimize upsets
Complete paperwork and passes on relevant information to the next shift, keeps up to date on procedure changes and passes on information, keeps up to date on operating parameters, reads metallurgist notes and board targets if associated with area, demonstrates group leadership/mentoring, maintains continuity on operating parameters between shifts and with metallurgical targets, monitors all screens and information
Complete daily, weekly and monthly area inspection/checks as required in the area assigned
Maintain a clean work area and will perform cleanup duties associated to his/her assigned area
Operator effectively responds to operational alarms following safe procedures and standard practices
Operate SAG mill to maximize tonnage without having grind outs, operates flotation circuits to maximize tonnage, grade and recovery when working in these modules
Employee will commit to all other duties assigned to by shift supervisor or designee
Qualifications
High School Diploma or equivalent
Three (3) years’ experience in Mill Operations or equivalent
Able to lift 75 lbs on a regular basis
Capable of wearing PPE including; hard hat, respirator, safety glasses, steel toed boots, hearing protection, or any other Personal Protective Equipment.
Highly motivated
Follow directions
Be a team player
Work outdoors with a potential exposure to extreme climatic conditions
Desire to advance to higher levels in the competency development system by training and becoming proficient at specific tasks and duties in the Mill Operations department
Working Conditions
Access: Fly in, fly out
Schedule: We offer a two-weeks on / two-weeks off rotational schedule to support a healthy work-life balance.
Accommodation: Our modern facilities, including dedicated spaces for group and individual physical activities, weights, cardio equipment, movie rooms, theme nights, and modern accommodation complexes. All meals are provided, making it easier for you to focus on your work and well-being.
Culture: At Red Dog, we believe in fostering a safe and healthy environment for all our employees. We are proud to be a drug and alcohol-free workplace and will include a drug test as part of our hiring process.
Why Teck
At Teck, your work matters — to the world, to our communities and to your future. As a leading Canadian resource company, we focus on responsibly providing the metals essential for global development and the energy transition while caring for the people, communities and land that we love. We do this guided by our values that, together, form The Teck Way. At Teck, you’ll find purpose-driven work, a culture of respect and inclusion, and the opportunity to grow your career while helping build a better world.
Apply with us
Take the next step in your career by applying for the Mill Operator IV (Casual) x2 role. We review applications on a rolling basis and encourage you to apply, even if your experience doesn’t align perfectly with every requirement.
We are an equal opportunity employer committed to an inclusive, barrier-free hiring process. Accommodations are available upon request, and all qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law.
Requisition ID: 54330 | Job Category: Mining, Milling & Smelting Operations | Employment Type: Casual | Location: Red Dog | Workplace Type: #LI - On-site
Apply now
Apply Now
Apply with LinkedIn
Start
Please wait...
Closing Date: Open Until Filled
- Location: Red Dog Mine, AK, United States
- Employment Type: Casual
- Workplace Type: On-site
About Red Dog
Red Dog Operations is both the largest critical minerals mine in the United States and one of the largest zinc mines in the world. In 1982, Red Dog was developed through a partnership between Teck and the land-owner NANA, an Alaska Native corporation owned by the Iñupiat of northwest Alaska. The partnership between Teck and NANA ensures real benefits for the local Iñupiat community, while recognizing there is still more to do as we advance our commitment to sustainable practices and meaningful engagement.
Role Overview
Reporting to the Mill Operations Supervisor or designee, the Level IV Operator is responsible for including but not limited to any area of the mill that the Mill Operations Supervisor or designee assigns to them. A Level IV Operator must have an in depth understanding of operational and metallurgical aspects within the module they are operating.
Responsibilities
Follow and enforces all established Safety and Standard Operating Procedures
Complete work area safety inspections and SETA cards as required
Pass all testing requirements for associated module
Willing to operate any area module for any amount of time as the needs of the operation dictate
Alert control room operator and other departments to irregular/non-compliant conditions
Respond quickly to radio calls
Maintain a courteous manner (language) in person and on the radio
Maintain a positive working relationship with other operators and other groups
Provide constructive input with regard to safety and operational issues
Apply Hazard Recognition training to daily workplace activities
Full knowledge of all that employee has completed a competency including but not limited to Reagent, Water Treatment Plants, Dewatering, Ball Charger and either Grinding or Flotation basics, as well as all by-pass circuits associated to the above areas
Train department personnel in operational areas in the mill including but limited to OIT duties, Reagents, Water Treatment Operations, Dewatering, Ball Charging and or either Flotation and Grinding modules
Demonstrate group leadership/mentoring
Plant functions include but are not limited to assist/aid operators and other departments in work areas, demonstrate startup/shutdown procedures, react to tonnage and grade changes in a timely manner, responds to non-compliant/irregular operating parameters, runs equipment in auto to maximize recovery and minimize upsets
Complete paperwork and passes on relevant information to the next shift, keeps up to date on procedure changes and passes on information, keeps up to date on operating parameters, reads metallurgist notes and board targets if associated with area, demonstrates group leadership/mentoring, maintains continuity on operating parameters between shifts and with metallurgical targets, monitors all screens and information
Complete daily, weekly and monthly area inspection/checks as required in the area assigned
Maintain a clean work area and will perform cleanup duties associated to his/her assigned area
Operator effectively responds to operational alarms following safe procedures and standard practices
Operate SAG mill to maximize tonnage without having grind outs, operates flotation circuits to maximize tonnage, grade and recovery when working in these modules
Employee will commit to all other duties assigned to by shift supervisor or designee
Qualifications
High School Diploma or equivalent
Three (3) years’ experience in Mill Operations or equivalent
Able to lift 75 lbs on a regular basis
Capable of wearing PPE including; hard hat, respirator, safety glasses, steel toed boots, hearing protection, or any other Personal Protective Equipment.
Highly motivated
Follow directions
Be a team player
Work outdoors with a potential exposure to extreme climatic conditions
Desire to advance to higher levels in the competency development system by training and becoming proficient at specific tasks and duties in the Mill Operations department
Working Conditions
Access: Fly in, fly out
Schedule: We offer a two-weeks on / two-weeks off rotational schedule to support a healthy work-life balance.
Accommodation: Our modern facilities, including dedicated spaces for group and individual physical activities, weights, cardio equipment, movie rooms, theme nights, and modern accommodation complexes. All meals are provided, making it easier for you to focus on your work and well-being.
Culture: At Red Dog, we believe in fostering a safe and healthy environment for all our employees. We are proud to be a drug and alcohol-free workplace and will include a drug test as part of our hiring process.
Why Teck
At Teck, your work matters — to the world, to our communities and to your future. As a leading Canadian resource company, we focus on responsibly providing the metals essential for global development and the energy transition while caring for the people, communities and land that we love. We do this guided by our values that, together, form The Teck Way. At Teck, you’ll find purpose-driven work, a culture of respect and inclusion, and the opportunity to grow your career while helping build a better world.
Apply with us
Take the next step in your career by applying for the Mill Operator IV (Casual) x2 role. We review applications on a rolling basis and encourage you to apply, even if your experience doesn’t align perfectly with every requirement.
We are an equal opportunity employer committed to an inclusive, barrier-free hiring process. Accommodations are available upon request, and all qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law.
Requisition ID: 54330 | Job Category: Mining, Milling & Smelting Operations | Employment Type: Casual | Location: Red Dog | Workplace Type: #LI - On-site
Apply now
Apply Now
Apply with LinkedIn
Start
Please wait...
Information at a Glance
Apply now
Apply Now
Apply with LinkedIn
Start
Please wait...
Posting Start Date
11/8/26
Job Category
Mining, Milling & Smelting Operations
Job Type
Casual
Career Status
Experienced
Workplace Type
On-site
Job Category
Mining, Milling & Smelting Operations
Job Type
Casual
Career Status
Experienced
Workplace Type
On-site
Home
Explore Careers
Opens in a new tab.
Opens in a new tab.
Opens in a new tab.
Opens in a new tab.
COMPANY
Work at Teck
Grow at Teck
Our People
News
RECRUITMENT
Join Talent Network
How We Hire
Privacy Policy
Contact Us
©2025 Teck Resources Limited