Perform power and signal integrity simulations for 10 Gbps+ SERDES and high-speed I/O, from model extraction through simulation, reporting, and recommended design changes.
Lead or support FPGA board design (Xilinx and/or Altera), including DDR3/DDR4/DDR5 discrete memory subsystems.
Direct lab technicians on system installation, bring-up, and debug of boards and multi-board systems, including root-cause investigation of the most complex issues.
Collaborate with mechanical, PCB layout, and manufacturing teams to ensure designs are optimized for signal integrity, manufacturability (DFM), and reliability.
Author and maintain design documentation (HDDs, pinout tables, design review packages) to support cross-team alignment and program reviews.
Serve as a key or primary technical point of contact with customers and cross-functional stakeholders on system architecture decisions and trade-offs.
Support factory/production builds and new product introduction (NPI) activities as needed.
Required Qualifications & Experience
Core Board Design & Signal Integrity
Experience with the board design process including schematic capture, PCB stack-up, PCB layout (26+ layers), BOM management, and design verification testing.
Experience with FPGA board design (Xilinx and/or Altera).
FPGA HDL coding experience.
Experience with 10 Gbps or higher SERDES board designs.
Experience performing power and signal integrity simulations for 10 Gbps+ signals, including various I/O analyses, using established methodologies from model extraction through simulation, reporting, and recommending design changes to address failing simulations.
Experience with circuit and layout guidelines, high-speed design concepts, signal integrity, and transmission line theory.
Experience with DDR3/DDR4/DDR5 discrete component board designs.
System architecture design experience; candidates for the Staff level should have experience defining architecture across multiple boards/platforms.
Protocols, Tools & Test Equipment
Familiarity with I2C, JTAG, UART, SPI, SD Card, PCIe, and eMMC protocols.
Familiarity with test equipment including oscilloscopes, logic analyzers, and protocol analyzers.
Board- and system-level bring-up and debug experience.
Basic Linux/Unix experience.
Familiarity with Microsoft Office, Mentor Graphics DxDesigner/Expedition, Vivado, Quartus, HyperLynx, Sigrity PowerSI/PowerDC, ADS, Ansys HFSS, and SPICE.
Collaboration & Professional Skills
Proven ability to work with cross-functional teams (mechanical, PCB layout, manufacturing, software/firmware, program management) to deliver high-quality boards and systems on schedule.
Strong written and verbal communication skills, including the ability to present design trade-offs and simulation results to technical, customer, and cross-functional audiences.
Demonstrated ability to work independently, prioritize competing priorities, and drive tasks to closure with minimal supervision.
Experience mentoring or providing technical guidance to junior engineers; Staff-level candidates should also demonstrate experience mentoring senior engineers and leading design reviews.
Preferred Qualifications (Nice to Have)
Power supply design experience.
Experience with signal integrity and PDN (power delivery network) simulations.
Experience with Design for Manufacturing (DFM) and Design for Test (DFT) reviews with PCB fabricators and contract manufacturers.
Familiarity with scripting languages (Python, Perl) for design automation, data extraction, or test/analysis workflows.
Industry certification such as IPC Certified Interconnect Designer (CID) or equivalent.
Experience supporting a product from concept through production release and factory NPI.
(Staff) Experience defining board/system design methodology or reusable IP/standards adopted across multiple programs, and/or prior experience as a technical lead or architect on a hardware program.
Education & Experience
5+ years’ experience in system architecture, hardware board design, and signal integrity simulations required; 10+ years typically expected for consideration at the Staff level.
Bachelor’s or Master’s Degree in Electrical/Electronics Engineering, Computer Engineering, or a related field — or equivalent practical experience.
Additional Requirements
This is a 100% on-site position based in San Diego, CA; the role requires regular in-person lab access to support system installation, bring-up, and debug, and is not eligible for remote or hybrid work.
Ability to lift/move lab equipment and boards as needed, and to work in a lab environment for extended periods during bring-up and debug cycles.
Minimum Qualifications
- Bachelor's degree in Science, Engineering, or related field and 4+ years of ASIC design, verification, validation, integration, or related work experience.
- OR
- Master's degree in Science, Engineering, or related field and 3+ years of ASIC design, verification, validation, integration, or related work experience.
- OR
- PhD in Science, Engineering, or related field and 2+ years of ASIC design, verification, validation, integration, or related work experience.
Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries).
To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications.
EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification.
Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law.
Pay range and Other Compensation & Benefits
$145,600.00 - $218,400.00
The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Even more importantly, please note that salary is only one component of total compensation at Qualcomm. We also offer a competitive annual discretionary bonus program and opportunity for annual RSU grants (employees on sales-incentive plans are not eligible for our annual bonus). In addition, our highly competitive benefits package is designed to support your success at work, at home, and at play. Your recruiter will be happy to discuss all that Qualcomm has to offer – and you can review more details about our US benefits at this link.
If you would like more information about this role, please contact Qualcomm Careers.
