Micron Technology
From Micron Technology's careers page
Status: listed on the employer's own careers page when we last checked (daily). Confirm on their site before applying.
Our vision is to transform how the world uses information to enrich life for all.
Join an inclusive team passionate about one thing: using their expertise in the relentless pursuit of innovation for customers and partners. The solutions we build help make everything from virtual reality experiences to breakthroughs in neural networks possible. We do it all while committing to integrity, sustainability, and giving back to our communities. Because doing so can fuel the very innovation we are pursuing.
Singapore
Department
Advanced NAND Process Development
Project Title
Elimination of Wafer-Edge Coating in the Pillar Module
Project Description
The Pillar module applies a sacrificial wafer-edge coating before high-aspect-ratio patterning to mitigate wafer-edge arcing. While effective, this coating adds process steps, cycle time, and consumable costs.
An ongoing engineering evaluation within the Wafer Edge Region Process Development team has demonstrated that the coating can be removed from a limited wafer population without process excursions. This internship project represents the next phase of that evaluation.
Working under the guidance of experienced process development engineers, the intern will expand the existing dataset and analytical framework to address the remaining technical questions before a permanent process change can be approved. The project will provide practical exposure to experimental design, semiconductor process integration, wafer-edge characterization, statistical analysis, and AI-enabled engineering workflows.
Objective of the Project
Compare wafer-edge defect performance between coated and coating-free wafers.
Determine whether removing the coating increases wafer-edge arcing in downstream process modules and, if so, identify its origin.
Develop a safe and systematic approach for increasing the run rate of coating-free wafers.
Establish the inline monitoring criteria and process margins required to enable full conversion to a coating-free process.
Opportunities for Full-Time Employment
This project closely reflects the responsibilities of a Wafer Edge Region and Uniformity Process Development Engineer. These include designing experiments, collecting and analyzing data, distinguishing genuine process effects from confounding variables, understanding integration and structural constraints at the wafer edge, and presenting data-driven recommendations during technical reviews.
The intern will work directly with the engineering owners of the module and gain hands-on experience in a production development environment.
Interns who demonstrate strong engineering judgment, rigorous data analysis, and ownership of their deliverables may be considered for graduate Process Development Engineer opportunities within NAND Process Development in Singapore, subject to business requirements, position availability, and the applicable selection process.
The intern will also complete a well-documented wafer-edge process development project that can serve as a reference for future career opportunities.
Project Scope
Develop an understanding of the general process flow for three-dimensional NAND memory and where the Pillar module and its edge-protection step are positioned within the process.
Examine why edge protection is used before high-aspect-ratio etching and how film stress, adhesion, and edge profiles contribute to peeling and particulate defects at the wafer bevel and backside.
Learn wafer-edge, bevel, and backside inspection techniques, as well as relevant defect-classification conventions.
Observe defect-review and cross-section characterization sessions with the engineering team to connect defect signatures to their physical origins.
Apply statistical methods, including design of experiments, hypothesis testing, variance decomposition, and correlation analysis, while recognizing potentially confounded comparisons such as calendar effects, tool mix, and lot mix.
Learning Opportunities
Gain practical exposure to semiconductor process development, process integration, wafer-edge engineering, metrology, and defect characterization.
Develop experience in distinguishing process effects from confounding variables within large and imperfect manufacturing datasets.
Learn to use approved Artificial Intelligence tools, including Microsoft 365 Copilot and Claude, to generate and refactor analysis code, summarize technical information, and draft report content.
Strengthen technical writing, presentation, and cross-functional collaboration skills through engagement with process owners and engineering stakeholders.
Deliverables
A validated comparison of wafer-edge defects and arcing performance between coated and coating-free wafers.
A statistically defensible data package addressing process performance, technical risks, process margins, and relevant confounding variables.
Recommended inline monitoring criteria and a systematic plan for increasing the run rate of coating-free wafers.
Reproducible analysis tools, documented methodologies, and a final technical presentation summarizing the findings and recommendations.
Impact of the Project
Process simplification: Validated removal of the wafer-edge coating would reduce the number of process steps in the Pillar module, shorten cycle time, and reduce consumable usage.
Defect and uniformity improvement: Removing the coating may eliminate defect and uniformity signatures associated with the coating boundary. The project will quantify these effects rather than assume them.
Improved decision quality: The data package will convert an initial feasibility observation from a limited wafer population into a statistically defensible basis for a permanent process change, including the wafer-edge margin evidence required by the relevant module owners.
Lasting analytical capability: The analysis tools and monitoring criteria developed through the project may remain in use by the engineering team and be applied to future wafer-edge process changes within the same module.
Foundation in semiconductor processing, particularly thin-film deposition, etching, lithography, film stress, and adhesion. Familiarity with planar or three-dimensional NAND memory process flows is advantageous.
Working knowledge of design of experiments and applied statistics, including statistical distributions, hypothesis testing, correlation, and regression.
Comfort working with large, imperfect manufacturing datasets, including data cleaning and validation against physical expectations. Exposure to industrial data-analysis or yield-analysis systems is advantageous but not required.
Familiarity with defect inspection, metrology, or failure-analysis data is advantageous but not required.
Practical experience with Artificial Intelligence tools such as Claude, Microsoft 365 Copilot, or an equivalent Large Language Model service for code generation, data exploration, and document summarization. Candidates should be able to construct clear prompts, evaluate AI-generated outputs critically, validate results against known references, and apply company-approved tools in accordance with data-handling and intellectual-property requirements.
The ideal candidate should also demonstrate clear written and verbal technical communication, structured problem-solving, disciplined documentation, self-directed learning, attention to detail, and the confidence to raise questions when data contradicts physical expectations.
Course of Interest
The ideal candidate should be pursuing a Master’s degree in Materials Science and Engineering, Chemical Engineering, Physics, Electrical and Electronic Engineering, or a related discipline.
Duration of Period
The ideal candidate should be able to commit to a full time internship period of 4 to 6 months.
We are an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life for all. With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron® and Crucial® brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities — from the data center to the intelligent edge and across the client and mobile user experience.
To learn more, please visit micron.com/careers
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.
To request assistance with the application process and/or for reasonable accommodations, please contact hrsupport_sg@micron.com
Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards.
Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron.
AI alert: Candidates are encouraged to use AI tools to enhance their resume and/or application materials. However, all information provided must be accurate and reflect the candidate's true skills and experiences. Misuse of AI to fabricate or misrepresent qualifications will result in immediate disqualification.
Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website in the About Micron Technology, Inc.
Scores your resume against this job the way resume scanners do: the job's hard and soft skills, searchability, recruiter tips and formatting.
Create a free account to see your score. Your resume stays in this browser until then, and we never store it.
Already a member? Sign in