Valid drivers license required to drive company vehicle
This position requires up to 80% travel.
Pay: $33.58-$54.34/Hr. (Dependent on experience)
Hours: Monday-Friday 6:00am-2:30pm
This is a Maintenance Technician position at Fort Smallwood site in Baltimore, MD.
PRIMARY PURPOSE OF POSITION
The position will be within the Mobile Turbine/Rotating Department and is responsible for performing all general mechanical maintenance on power plant equipment. The Mobile Turbine/Rotating team supports a culture of continuous improvement by participating in training, reinforcing standards, reporting, and mitigating unsafe or undesirable conditions, and utilizing the corrective action program. This position regularly requires 80% travel.
PRIMARY DUTIES AND ACCOUNTABILITIES
Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limit torque operators. (disassembly, part repair or replacement, assembly) using sound technical decisions regarding maintenance on complex mechanical equipment
Adheres to the conduct of maintenance and established maintenance standards and practices.
Perform assigned tasks in a safe and efficient manner at the direction of Maintenance Management.
Demonstrates strong maintenance skill on steam or gas turbines, turbine valves, reactor feed pump turbines (RFPT), terry turbines, various pumps, balance of plan (BOP) equipment in a safe and reliable manor using the correct tools, equipment such as rigging, fork trucks and cranes
Execute work package when assigned.
Interpret and understand power plant prints.
Ability to work on cross-functional teams on major projects.
Provide technical support to plant operations, maintenance staff and engineering to the level of training received.
Perform alignment on Rotating equipment to the level of training received.
Perform verification checks on maintenance items covered in maintenance technician training.
This role can be filled at Associate, Mid-level or Senior level. Please see minimum qualifications list below for each level***
MINIMUM QUALIFICATIONS Level I
Associates Degree in Power Plant Technology, Engineering Technology, or Electronics
OR
HS Diploma with minimum of 12 months of trade or technical experience in Power Plant Technology or relevant field experience
OR
Relevant Vocational Technical High School diploma with 6 months of Shop Experience at Fort Smallwood
Successfully complete the training requirements and time in job requirements for the position including previously passing the MASS test
Valid driver's license and access to an insured vehicle
Ability to lift a minimum of 50 pounds.
Ability to work in a power plant environment that includes climbing and walking long distances.
Exposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.
Works at high elevations on ladders and scaffolds.
Works shift work or weekends as required.
Perform tasks inside radiological controlled areas.
Maintains nuclear qualifications IAW CGS Specific training program.
Maintain Radiation Protection Qualification and training, including respirator qualifications as needed
Ability to obtain unescorted nuclear plant access
Basic computer skills
Good oral and written communication skills
MINIMUM QUALIFICATIONS Level II
Associates Degree in Power Plant Technology, Associates Degree in Power Plant Technology, Engineering Technology,
or
Electronics with minimum of 18 months of trade or technical training in Power Plant Technology
Successfully complete the training requirements and time in job requirements for the position including previously passing the MASS test
Valid driver's license and access to an insured vehicle
Ability to lift a minimum of 50 pounds.
Ability to work in a power plant environment that includes climbing and walking long distances.
Exposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.
Works at high elevations on ladders and scaffolds.
Works shift work or weekends as required.
Perform tasks inside radiological controlled areas.
Maintains nuclear qualifications IAW CGS Specific training program.
Maintain Radiation Protection Qualification and training, including respirator qualifications as needed
Ability to obtain unescorted nuclear plant access
Basic computer skills
Good oral and written communication skills
MINIMUM QUALIFICATIONS Level III
Associates Degree in Power Plant Technology, Engineering Technology, or Electronics with minimum of 3 years of trade or technical training in Power Plant Technology
OR
5 years’ experience in Maintenance Tech II or equivalent years of experience with trade or technical training in Power Plant Technology or relevant field experience
Successfully complete the training requirements and time in job requirements for the position including previously passing the MASS test
Valid driver's license and access to an insured vehicle
Ability to lift a minimum of 50 pounds.
Ability to work in a power plant environment that includes climbing and walking long distances.
Exposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.
Works at high elevations on ladders and scaffolds.
Works shift work or weekends as required.
Perform tasks inside radiological controlled areas.
Maintains nuclear qualifications IAW CGS Specific training program.
Maintain Radiation Protection Qualification and training, including respirator qualifications as needed
Ability to obtain unescorted nuclear plant access
Basic computer skills
Good oral and written communication skills
PREFERRED QUALIFICATIONS
Previous trade union experience (millwright or pipefitting)
Machinist experience
Welding experience
This is a Maintenance Technician position at Fort Smallwood site in Baltimore, MD.
PRIMARY PURPOSE OF POSITION
The position will be within the Mobile Turbine/Rotating Department and is responsible for performing all general mechanical maintenance on power plant equipment. The Mobile Turbine/Rotating team supports a culture of continuous improvement by participating in training, reinforcing standards, reporting, and mitigating unsafe or undesirable conditions, and utilizing the corrective action program. This position regularly requires 80% travel.
PRIMARY DUTIES AND ACCOUNTABILITIES
Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limit torque operators. (disassembly, part repair or replacement, assembly) using sound technical decisions regarding maintenance on complex mechanical equipment
Adheres to the conduct of maintenance and established maintenance standards and practices.
Perform assigned tasks in a safe and efficient manner at the direction of Maintenance Management.
Demonstrates strong maintenance skill on steam or gas turbines, turbine valves, reactor feed pump turbines (RFPT), terry turbines, various pumps, balance of plan (BOP) equipment in a safe and reliable manor using the correct tools, equipment such as rigging, fork trucks and cranes
Execute work package when assigned.
Interpret and understand power plant prints.
Ability to work on cross-functional teams on major projects.
Provide technical support to plant operations, maintenance staff and engineering to the level of training received.
Perform alignment on Rotating equipment to the level of training received.
Perform verification checks on maintenance items covered in maintenance technician training.
This role can be filled at Associate, Mid-level or Senior level. Please see minimum qualifications list below for each level***
MINIMUM QUALIFICATIONS Level I
Associates Degree in Power Plant Technology, Engineering Technology, or Electronics
OR
HS Diploma with minimum of 12 months of trade or technical experience in Power Plant Technology or relevant field experience
OR
Relevant Vocational Technical High School diploma with 6 months of Shop Experience at Fort Smallwood
Successfully complete the training requirements and time in job requirements for the position including previously passing the MASS test
Valid driver's license and access to an insured vehicle
Ability to lift a minimum of 50 pounds.
Ability to work in a power plant environment that includes climbing and walking long distances.
Exposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.
Works at high elevations on ladders and scaffolds.
Works shift work or weekends as required.
Perform tasks inside radiological controlled areas.
Maintains nuclear qualifications IAW CGS Specific training program.
Maintain Radiation Protection Qualification and training, including respirator qualifications as needed
Ability to obtain unescorted nuclear plant access
Basic computer skills
Good oral and written communication skills
MINIMUM QUALIFICATIONS Level II
Associates Degree in Power Plant Technology, Associates Degree in Power Plant Technology, Engineering Technology,
or
Electronics with minimum of 18 months of trade or technical training in Power Plant Technology
Successfully complete the training requirements and time in job requirements for the position including previously passing the MASS test
Valid driver's license and access to an insured vehicle
Ability to lift a minimum of 50 pounds.
Ability to work in a power plant environment that includes climbing and walking long distances.
Exposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.
Works at high elevations on ladders and scaffolds.
Works shift work or weekends as required.
Perform tasks inside radiological controlled areas.
Maintains nuclear qualifications IAW CGS Specific training program.
Maintain Radiation Protection Qualification and training, including respirator qualifications as needed
Ability to obtain unescorted nuclear plant access
Basic computer skills
Good oral and written communication skills
MINIMUM QUALIFICATIONS Level III
Associates Degree in Power Plant Technology, Engineering Technology, or Electronics with minimum of 3 years of trade or technical training in Power Plant Technology
OR
5 years’ experience in Maintenance Tech II or equivalent years of experience with trade or technical training in Power Plant Technology or relevant field experience
Successfully complete the training requirements and time in job requirements for the position including previously passing the MASS test
Valid driver's license and access to an insured vehicle
Ability to lift a minimum of 50 pounds.
Ability to work in a power plant environment that includes climbing and walking long distances.
Exposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.
Works at high elevations on ladders and scaffolds.
Works shift work or weekends as required.
Perform tasks inside radiological controlled areas.
Maintains nuclear qualifications IAW CGS Specific training program.
Maintain Radiation Protection Qualification and training, including respirator qualifications as needed
Ability to obtain unescorted nuclear plant access
Basic computer skills
Good oral and written communication skills
PREFERRED QUALIFICATIONS
Previous trade union experience (millwright or pipefitting)
Machinist experience
Welding experience