WHAT YOU WILL OWN
Lead assigned atmospheric and advanced-packaging programs across the full lifecycle: opportunity and requirements definition, feasibility, program initiation, detailed planning, phase-gate readiness, design release, prototype and alpha/beta builds, DVT and SQA readiness, production transfer, customer shipment, installation, qualification, ramp, field stabilization, and closure.
Establish and control the integrated program baseline, including customer and system requirements, measurable acceptance criteria, product configuration, interfaces, milestones, critical path, named resource assumptions, BOM maturity, cost targets, quality objectives, customer commitments, and decision rights.
Build and maintain an integrated master schedule across Product Management, Applications, Systems Engineering, mechanical/electrical/software/controls Engineering, Operations, Supply Chain, Quality, Service, regional teams, suppliers, OEM partners, and the customer. Distinguish requested dates, target dates, and approved commitments.
Turn ROM estimates and functional inputs into executable plans by probing task logic, identifying named resources and allocations, leveling constrained capacity, validating material and test lead times, and obtaining explicit functional commitment.
Own the program risk, issue, assumption, dependency, decision, action, and change-control system. Convert red status into technical and business consequences, recovery options, a recommendation, a decision owner, and a required decision date.
Lead phase-gate readiness as an evidence-based decision. Make incomplete deliverables, residual risks, waivers, deviations, temporary workarounds, open defects, and conditional approvals explicit, owned, scheduled, and closed.
Control post-baseline changes. Quantify impacts to system architecture, interfaces, design, verification, software, BOM, tooling, fixtures, documentation, service, spares, schedule, resources, product cost, NRE, quality, throughput, yield, revenue timing, and customer commitments before approval and re-baselining.
Lead customer-facing program, design-readiness, build-readiness, installation, and recovery reviews. Push back constructively when requirements, acceptance criteria, dates, or trade-offs are not supportable while maintaining the customer relationship.
Create concise executive communication showing baseline versus forecast, critical-path movement, configuration maturity, top technical and commercial risks, recovery scenarios, recommendation, and decisions required.
Drive complete program closure, including as-built/as-shipped configuration, manufacturing and service readiness, field actions, verification closure, lessons learned, ownership transfer, and retirement of temporary workarounds.
TECHNICAL LEADERSHIP EXPECTATIONS
Develop sufficient system-level understanding to engage credibly with mechanical, electrical, controls, software, systems, test, manufacturing, quality, applications, and supplier engineers. Know enough to detect gaps, question unsupported conclusions, and recognize when a local answer does not close the system or customer risk.
Lead technical program reviews that connect customer requirements, system architecture, subsystem interfaces, design maturity, build configuration, verification evidence, manufacturing readiness, field conditions, cost, schedule, and customer acceptance.
Understand atmospheric automation architecture, including EFEMs, robots and end effectors, load ports, aligners, vision and mapping, motion/control systems, safety systems, host and equipment interfaces, configuration files, and the interaction between Brooks equipment and the customer or OEM tool.
Understand advanced-packaging handling challenges sufficiently to question requirements and decisions involving panel or wafer size, thickness, weight, warpage or bow, materials, surface conditions, pitch, slot utilization, vacuum handling, acceleration, vibration, repeatability, positioning, mapping, contamination, throughput, and breakage or yield risk.
Challenge design changes by asking what requirement or field problem is being solved, what measurable acceptance criterion applies, what alternatives were evaluated, which interfaces are affected, what must be reverified, and how the change affects throughput, reliability, BOM, lead time, tooling, software, documentation, service, schedule, and customer commitments.
Understand product and configuration structures well enough to reconcile selection guides, system requirements, configuration matrices, engineering BOMs, manufacturing BOMs, as-built/as-shipped records, software and parameter versions, ECOs, deviations, substitutions, effectivity, and field-upgrade content.
Probe engineering estimates and recovery plans using system dependencies, design and release cycles, FEA or analysis completion, prototype-learning cycles, supplier lead time, fixture and tooling readiness, software integration, tuning, test capacity, DVT/SQA sequence, defect closure, rework, logistics, and installation constraints.
Use technical artifacts as program evidence, including MRDs and customer requirements, selection guides, architecture and interface documents, drawings and specifications, design-review outputs, FMEA, FEA, verification matrices, DVT/SQA plans and results, throughput and repeatability data, defect records, ECOs, deviations, BOMs, build documentation, and field procedures.
Ensure field fixes, customer-specific software or parameter changes, temporary workarounds, technical debt, open defects, waivers, and undocumented tribal knowledge are captured, reproducible, risk-assessed, owned, and closed or formally accepted.
Translate technical choices into schedule, cost, quality, throughput, yield, capacity, customer, and business consequences so leadership can make informed decisions without losing engineering reality.
HOW YOU WILL IMPROVE THE OPERATING SYSTEM
Improve front-end readiness by challenging incomplete selection guides, undefined substrate or interface requirements, unclear acceptance criteria, unsupported dates, immature configurations, and weak resource assumptions before the organization commits.
Help define a practical readiness review before PCM so large cross-functional teams are not used to discover basic scope gaps. Ensure PCM receives decision-quality inputs and produces an explicit acceptance, rejection, or conditional path.
Create disciplined configuration and change control across customer requests, product definitions, BOMs, software/configuration files, as-shipped systems, and field upgrades. Prevent customer-specific one-offs from becoming invisible product obligations.
Use Smartsheet as the execution source and SharePoint as the governed home for program artifacts. Use enterprise data and concise program views to make decisions, not to recreate status manually across reports.
Apply common minimum controls with governance tailored by novelty, customer exposure, technical risk, and complexity. Protect non-negotiable controls for requirements, configuration, safety, verification, manufacturing readiness, financial exposure, and customer acceptance.
Reduce firefighting, hidden priority shifts, repeated schedule reconstruction, field rework, engineer travel, and dependence on individual heroics by fixing the mechanisms that create recurring execution failure.
Help prepare programs for scale, including global production transfer and volume ramp, so successful prototypes do not depend on the original engineering team to build, tune, install, or sustain every system.
WHAT SUCCESS LOOKS LIKE
Customer and business commitments are based on validated requirements, measurable acceptance criteria, a controlled configuration, credible resource assumptions, and an understood business case.
The integrated schedule reflects the real technical critical path, named resources, material and tooling lead times, software integration, verification cycles, global logistics, installation, and explicit priority decisions.
Program and technical reviews produce decisions and closure. Risks surface early enough to create choices before shipment, field performance, revenue, or customer confidence is compromised.
Product configurations remain traceable from customer requirement through selection guide, design, BOM, software/configuration version, build, shipment, installation, and field upgrade.
Products move from prototype and customer-specific execution to repeatable manufacturing, installation, and support with less field recovery and less diversion of scarce engineering resources.
Leadership receives a clear recommendation when customer scope, throughput targets, technical feasibility, capacity, or schedule conflict, rather than an unprioritized list of actions.
WHAT YOU WILL BRING
Bachelor’s degree in Mechanical, Electrical, Software, Systems, Mechatronics, Manufacturing Engineering, or a related technical discipline. An advanced degree is valued but not required.
At least 6 years of experience spanning technical program management, systems engineering, product development, engineering leadership, applications engineering, or operations, including at least 3 years owning complex cross-functional programs.
Direct experience with semiconductor capital equipment, factory automation, robotics, advanced packaging, mechatronics, medical devices, aerospace, or similarly complex electromechanical hardware/software systems.
Technical fluency in systems combining mechanisms and structures, precision motion or robotics, end effectors, electrical controls, sensors and vision, embedded or application software, safety systems, manufacturing, and field integration.
Ability to read and interrogate requirements, configurations, BOMs, drawings and specifications, interface definitions, FMEA/FEA outputs, verification matrices, test reports and data, defect records, engineering changes, deviations, and manufacturing- and field-readiness evidence.
Demonstrated ability to lead technical design and program reviews, question design changes and engineering assumptions, and convert unresolved work into explicit program risk, schedule impact, resource demand, and decision requirements.
Demonstrated ownership of integrated master schedules, critical-path management, resource loading and leveling, global dependencies, recovery planning, baseline control, and formal change control.
Experience managing customer-facing programs with evolving requirements, custom configurations, development hardware, field qualification, global installation, and production transfer.
Ability to influence without authority and challenge functional leaders, customers, or senior stakeholders with facts, alternatives, quantified consequences, and a clear recommendation.
Ability to connect technical execution to NRE, product cost, margin, volume, revenue timing, customer value, quality, throughput, yield, and return on investment.
Hands-on proficiency with Smartsheet or Microsoft Project plus Excel, PowerPoint, Teams, SharePoint, and dashboard tools. Tool fluency must be paired with technical judgment and program leadership.
Clear written and verbal communication across cultures, organizations, and time zones. Experience leading globally distributed teams in Asia, Europe, and North America is strongly preferred.
STRONGLY PREFERRED
Experience with EFEMs, wafer or panel handling robots, end effectors, load ports, aligners, vision/mapping, motion control, industrial software, equipment interfaces, or customer-tool integration.
Experience with advanced-packaging substrates, including panels, bonded wafers, film frames, JEDEC trays, heavy or warped payloads, metrology, mapping, and high-throughput handling.
Experience recovering a distressed technical or customer program with measurable improvement in schedule, cost, quality, throughput, field stability, or customer outcome.
Experience scaling from prototype or customer-specific development to repeatable production, global installation, service readiness, and high-volume demand.
Experience improving phase-gate governance, PCM or intake readiness, requirements and configuration control, portfolio prioritization, or executive operating cadence.
PMP, PgMP, systems-engineering, quality, Lean, or equivalent credentials are valued, but demonstrated technical judgment and ownership are more important.
WORK ENVIRONMENT AND TRAVEL
This role operates in a fast-paced, customer-facing technical environment and requires periodic travel to Brooks sites, suppliers, OEM partners, manufacturing locations, and customer facilities. Regular collaboration across North American, Asian, and European time zones is expected, with increased travel during builds, integration, qualification, recovery, and production-transfer phases.
Compensation
Base Salary Range: $110,621.72 USD to $149,664.68 USD
Factors which may affect starting pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate.
This position is also eligible for an annual discretionary bonus.
Benefits
At Brooks, we offer the following benefits for this position, subject to applicable eligibility requirements:
Medical, Dental, Vision and Disability Insurance
401(k) Plan
Exempt employees are provided company paid holidays and Flexible Vacation to enjoy personal time off and incidental sickness.
Have a question about our benefits and compensation package? Your recruiter can share more with you during the hiring process.
Work Location & Flexibility
At Brooks, we aim to foster a collaborative and engaging environment while offering flexibility where possible. Work arrangements may include a mix of in-office and remote work, depending on the nature of the role and business needs. Specific expectations will be shared during the interview process.
Brooks is committed to fostering a diverse and inclusive workplace and proudly serves as an equal-opportunity employer. We welcome all qualified applicants regardless of race, color, religion, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or any other legally protected characteristics.
Diversity enhances our innovative capabilities and strengthens our ability to serve our customers and communities effectively. At Brooks Automation, we celebrate the unique experiences and perspectives each individual brings, believing they are essential to our collective success. Join us in building a workplace where every team member is valued and can thrive.
For applicants with disabilities requiring accommodations, don't hesitate to get in touch with talentattraction@brooks.com or call +1 (978) 262-2400 to discuss your needs.
Review EEO Law & EEO Statement.
Brooks Automation participates in E-Verify® to confirm eligibility for employment in the United States. For more details, visit www.dhs.gov/E-Verify. E-Verify® is a registered trademark of the U.S. Department of Homeland Security.
