Verify supplier-provided hardware against purchase orders, engineering drawings, and specifications
Lead preparation and disposition of Non-Conformance Reports (NCRs) for nonconforming parts; present dimensional findings and recommendations to the MRB
Provide quality and metrology technical leadership, audit, inspection, problem identification/resolution, training, and expertise to manufacturing groups and suppliers
Review and approve inspection records for compliance with AS9100/ISO 9001 requirements
Lead and execute First Article Inspections per AS9102 standard
Verify all design characteristics, material certifications, manufacturing process verification, and nonconformance resolution during FAI
Define FAI strategies and execute inspections for new parts, design changes, process changes, and after long production lapses
Utilize CMMs, OPTIV M multisensor systems, ROMER arms, 3D scanners, hand tools, and other testing equipment for FAI verification
A day in the life
This role will work daily to
Perform CMM programming function across all metrology platforms (bridge/gantry CMMs, ROMER Absolute Arms, Hexagon OPTIV M multi-sensor systems) — develop, validate, and maintain inspection programs while establishing programming standards, revision control processes, and best practices for the metrology team
Interfacing with Quality, Design, Manufacturing Engineering, and Supplier Quality teams — drive metrology input into new product development, define inspection strategies for incoming hardware, and support supplier PPAP correlation activities
Assist with dimensional root cause and corrective action (RCCA) investigations for non-conforming hardware — perform detailed CMM analysis to isolate failure modes, author nonconformance reports, and present findings with data-driven recommendations to the Material Review Board (MRB)
Mentor and develop CMM programmers, machine operators, and inspection personnel — conduct training on programming techniques, multi-sensor workflows, GD&T interpretation, and software proficiency across PC-DMIS, PolyWorks, and CALYPSO
Continuous improvement of metrology processes through Lean methodology — identify opportunities to reduce inspection cycle times, improve measurement repeatability, and optimize CMM utilization across the receiving inspection operation
About the team
The Amazon Leo Receiving Quality team is driven to develop an Amazon Leo Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join the team at an exciting moment, with an opportunity to own quality system development and contribute to the design of requirements, processes, and systems used across the business. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.
4+ years CMM programming experience (PC-DMIS specifically)
Experience performing FAI per AS9102
Proficient in reading/interpreting blueprints with GD&T per ASME Y14.5M
Experience with receiving inspection of aerospace components
Knowledge of AS9100/ISO 9001 quality management systems
Experience with tight-tolerance, high-value aerospace components
Fluent in precision hand tools, gages, optical comparators, and surface plate work
Experience documenting and tracking discrepancy/non-conformance reports
Calibration management experience
Demonstrated experience programming multiple Hexagon metrology platforms including bridge/gantry CMMs, ROMER Absolute Arm portable CMMs, and OPTIV M multisensor CMMs (Vision+, Scan+, or DualScan+ variants)
Experience developing multisensor inspection programs that combine vision, tactile, and/or laser measurement within a single measurement routine
Proficiency with additional metrology software platforms such as PolyWorks Inspector and/or ZEISS CALYPSO
Experience developing and maintaining CMM program libraries, revision control processes, and standardized inspection documentation across multiple metrology platforms
Experience mentoring, and training CMM programmers and inspection personnel on advanced programming techniques, multisensor workflows, and best practices
Experience within the Hexagon metrology ecosystem — PC-DMIS across bridge CMMs, ROMER arms, OPTIV M multisensor systems (Vision+, Scan+, or DualScan+ variants), and Hexagon Metrology Asset Manager
Experience programming OPTIV M multisensor routines that leverage vision, touch-trigger, scanning, and/or laser sensors for complex part inspection in a single measurement run
Experience with PC-DMIS automation routines, custom scripting, or integration with ERP/MES systems for inspection data flow
Experience with statistical process control (SPC) tools and using CMM data to build process capability studies and control charts
PPAP documentation and submission experience, including measurement correlation studies across multiple CMM platforms
Experience developing in-process inspection programs and integrating metrology into production workflows
Knowledge of NADCAP special processes (heat treat, plating, coating, EDM, grinding) and their impact on dimensional inspection requirements
Experience in satellite/space hardware manufacturing or other high-reliability aerospace programs
Experience with 3D scanning, CT scanning, or non-contact measurement technologies integrated with PC-DMIS
IPC-A-610 and J-STD-001 knowledge (for PCBA receiving inspection)
Experience with calibration program management and measurement system analysis (MSA/Gage R&R)
Experience driving Lean process improvements within a metrology or CMM programming function
Knowledge of ERP systems (e.g., SAP, Oracle) for traceability and inspection record management
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.
The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at https://amazon.jobs/en/benefits.
USA, WA, Everett - 117,300.00 - 160,000.00 USD annually