or--
A suburb just outside the Dallas-Fort Worth metropolitan area is home to Airbus Helicopters U.S. regional headquarters, where we have more than 1,000 employees. Check out one of the seven professional sports teams that also call Dallas home - you may even see a special, custom Airbus helicopter dedicated to the Dallas Cowboys flying during home games. (Note-candidate(s) selected from the DFW area will be expected to travel to Bingen, WA extensively during the first 90 days of employment)
How We Care for You
Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”)
Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program.
Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages.
Your Challenges
Flight Dynamics, Performance & Control Analysis (30%)
Analyze and model UAV flight mechanics, including aerodynamic forces, stability, and control response.
Evaluate and refine flight performance metrics such as endurance, climb rate, turn capability, and control authority.
Correlate flight test data with aerodynamic and performance models to validate system behavior and identify discrepancies.
Support flight envelope expansion, ensuring aircraft operate safely within aerodynamic and structural limits.
Contribute to defining and verifying performance requirements and mission-level objectives.
Supports flight testing as required.
Guidance, Navigation & Control (GNC) Understanding and Refinement (30%)
Review, document, and tune existing control and navigation algorithms for attitude, position, and mission control.
Analyze control law performance under various flight conditions and refine parameters for improved stability and response.
Investigate and explain observed flight behaviors through theoretical and numerical analysis.
Support estimation and sensor fusion performance assessment (IMU, GPS, air data, magnetometer, etc.).
Collaborate with software and flight test teams to ensure accurate implementation and documentation of GNC logic.
Software & Avionics Comprehension (20%)
Own and continuously advance a comprehensive understanding of the autopilot and flight control software architecture, including embedded systems, control laws, and aircraft-level integration. Interpret and document algorithmic flow and software-hardware interactions.
Collaborate with embedded engineers to ensure correct integration and calibration of control laws.
Occasionally implement or prototype algorithm modifications and diagnostic tools using C/C++, Python, or MATLAB/Simulink.
Electrical and Systems Integration (10%)
Interpret electrical wiring diagrams and avionics schematics to understand system interfaces and dependencies.
Support system integration and troubleshooting activities related to sensors, flight computers, and actuators.
Participate in hardware-in-the-loop (HIL), software-in-the-loop (SIL), and bench-level testing to validate overall flight system behavior.
Documentation, Research & Continuous Improvement (10%)
Produce and maintain detailed technical documentation, including algorithm descriptions, test procedures, and performance reports.
Contribute to simulation model improvement and data processing workflows.
Stay informed on advances in UAV flight dynamics, GNC theory, and aeronautical system modeling.
Mentor junior engineers on principles of flight mechanics, stability, and control system design.
Your Boarding Pass
Possess a B.S. in Aerospace Engineering, Avionics Engineering, Electrical Engineering, or Control Systems Engineering.
Have ten (10) + years' of experience in aerospace, UAV, or flight control engineering.
Have five (5) + years' of hands-on experience with flight data analysis and performance validation.
Strong background in flight mechanics, aerodynamics, and aircraft performance analysis.
Demonstrated knowledge tuning or analyzing flight control and navigation algorithms.
Familiarity with C/C++, Python, and MATLAB/Simulink for analysis, documentation, or prototyping.
Understanding of embedded systems and avionics interfaces (CAN, UART, TCP/UDP, serial).
Ability to interpret electrical schematics and support hardware/software integration.
Good understanding of embedded systems and software development practices, with demonstrated ability to solve technical problems with little supervision.
Strong understanding of aircraft dynamics, stability & control, and flight performance principles.
Skilled in data analysis, simulation, and model correlation using real flight data.
Excellent ability to translate flight observations into actionable control system improvements.
Strong communication and documentation skills for technical and multidisciplinary collaboration.
Microsoft Visual Studio
Compilers, Debuggers
Source control
Git or GitLab.
Travel Required
10% Domestic and International
Citizenship
Must be a US Person under ITAR definition (For example, a U.S. Citizen, green card holder or person covered under our existing ITAR license)
Physical Requirements
Onsite or remote: 95% Onsite in Bingen, WA
Vision: able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings daily.
Hearing: able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms daily.
Speaking: able to speak in conversations and meetings, deliver information and participate in communications daily.
Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts daily.
Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily.
Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily.
Pushing / Pulling: able to push and pull small office furniture and some equipment and tools daily.
Sitting: able to sit for long periods of time in meetings, working on the computer daily.
Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving.
Standing: able to stand for discussions in offices or on the production floor daily.
Travel: able to travel independently and at short notice several times a month.
Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces daily.
Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site
Administrative position only PPE required: Steel-toed shoes are required for all shop floor visits, appropriate hearing/eye protection may also be required when visiting the shop floor.
Salary range based on the required profile: $147k to $236K /year. Actual minimum and maximum may vary based on geographic differential. Individual pay is based on skills, experience, and other relevant factors. This position offers the following benefits: Medical insurance, Dental insurance, Vision insurance, Prescription insurance, Employee Assistance Program, Flexible Spending Accounts, Health Savings Accounts, Basic & Voluntary Life and Accidental Death & Dismemberment insurance, Short and Long-term Disability insurance, 401(k), Paid time off including paid holidays, Tuition Assistance, Bonus(es) subject to performance criteria. These are our current benefit offerings for the current plan year and are subject to change without notice.
Take your career to a new level and apply now!
A full job description will be provided to candidates who progress to the interview stage or any candidate upon request.
This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.
Company
Aerovel Corporation
Employment Type
US - Direct Hire
Experience Level
Professional
Remote Type
On-site
Job Family
Vehicle Mission & Control <JF-EN-EU>
Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment.
By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.
Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com.
